Michael Fenn's Website

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== vSphere 5.1 bootstrap without using Windows ======

  - Install ESXi as per normal.  Configure the network with "Configure Management Network" in the DCUI F2 menu. Also in the F2 menu, go to "Troubleshooting Options" and enable SSH.  Verify that you can ssh to the hypervisor.
  - SSH to the hypervisor and run: <code bash>esxcli network nic list</code> and check all your NICs.  If they're not all there (Solarflare 10GbE for example), we need to get the driver and install it. Download the Solarflare "Driver CD" from VMware.  Paradoxically, it's a zip file.\\ \\ To install, first copy the driver from your host: <code bash>[mfenn@localhost drivers]$ scp -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null sfc-3.2.1.6082B-834060.zip root@esxi:/vmfs/volumes/datastore1/drivers/
Warning: Permanently added 'esxi' (RSA) to the list of known hosts.
Password:
sfc-3.2.1.6082B-834060.zip                    100%  875KB 875.2KB/s   00:00
</code> Then do the rest on the the hypervisor: <code bash> /vmfs/volumes/51102cb6-c62a7e02-7bc8-00259075bb60 # cd /vmfs/volumes/datastore1/
/vmfs/volumes/51102cb6-c62a7e02-7bc8-00259075bb60 # cd drivers/
/vmfs/volumes/51102cb6-c62a7e02-7bc8-00259075bb60/drivers # mkdir sfc-3.2.1.6082B-834060
/vmfs/volumes/51102cb6-c62a7e02-7bc8-00259075bb60/drivers # cd sfc-3.2.1.6082B-834060/
/vmfs/volumes/51102cb6-c62a7e02-7bc8-00259075bb60/drivers/sfc-3.2.1.6082B-834060 # unzip ../sfc-3.2.1.6082B-834060.zip
Archive:  ../sfc-3.2.1.6082B-834060.zip
  inflating: sfc-3.2.1.6082B-offline_bundle-834060.zip
  inflating: sfc.vib
  inflating: doc/README.txt
  inflating: source/driver_source_net-sfc_3.2.1.6082B-1OEM.500.0.0.472560.tgz
  inflating: doc/open_source_licenses_net-sfc_3.2.1.6082B-1OEM.500.0.0.472560.txt
  inflating: doc/release_note_net-sfc_3.2.1.6082B-1OEM.500.0.0.472560.txt
/vmfs/volumes/51102cb6-c62a7e02-7bc8-00259075bb60/drivers/sfc-3.2.1.6082B-834060 # esxcli software vib install -d /vmfs/volumes/datastore1/drivers/sfc-3.2.1.608
2B-834060/sfc-3.2.1.6082B-offline_bundle-834060.zip # YOU MUST GIVE A FULL PATH
Installation Result
   Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective.
   Reboot Required: true
   VIBs Installed: solarflare_bootbank_net-sfc_3.2.1.6082B-1OEM.500.0.0.472560
   VIBs Removed:
   VIBs Skipped:
/vmfs/volumes/51102cb6-c62a7e02-7bc8-00259075bb60/drivers/sfc-3.2.1.6082B-834060 # esxcli system maintenanceMode set -e yes
/vmfs/volumes/51102cb6-c62a7e02-7bc8-00259075bb60/drivers/sfc-3.2.1.6082B-834060 # esxcli system shutdown reboot -r "new driver"
</code> After reboot, verify that the new NICs are present and leave maintenance mode: <code bash>~ # esxcli network nic list
Name    PCI Device     Driver  Link  Speed  Duplex  MAC Address         MTU  Description
------  -------------  ------  ----  -----  ------  -----------------  ----  -------------------------------------------------
vmnic0  0000:002:00.0  igb     Up      100  Full    00:25:90:75:bb:60  1500  Intel Corporation I350 Gigabit Network Connection
vmnic1  0000:002:00.1  igb     Up      100  Full    00:25:90:75:bb:61  1500  Intel Corporation I350 Gigabit Network Connection
vmnic2  0000:004:00.0  sfc     Down      0  Half    00:0f:53:0b:21:50  1500  Solarflare BethpageA0
vmnic3  0000:004:00.1  sfc     Up    10000  Full    00:0f:53:0b:21:51  1500  Solarflare BethpageA0
~ # esxcli system maintenanceMode set -e no
</code>
  -  Now to create a new vSwitch on the 10g for VMs (you can skip this if you are going to use the default vSwitch). <code bash>~ # esxcli network vswitch standard add -P 128 -v vSwitch1
~ # esxcli network vswitch standard uplink add -u vmnic3 -v vSwitch1
~ # esxcli network vswitch standard portgroup add -p "VLAN 9" -v vSwitch1
</code>    If you need to add a VLAN tag to the portgroup (i.e. it's a tagged port at the switch, do this: <code bash>~ # esxcli network vswitch standard portgroup set -p "VLAN 9" -v 9
</code>
  - Then deploy the appliance with ovftool (this happens on your host, not the hypervisor). <code bash>[mfenn@localhost Downloads]$ chmod +x VMware-ovftool-3.0.1-801290-lin.x86_64.bundle
[mfenn@localhost Downloads]$ sudo ./VMware-ovftool-3.0.1-801290-lin.x86_64.bundle
[sudo] password for mfenn:
... GUI APPEARS ... (all defaults is fine)

[mfenn@localhost ~]$ ovftool --name=vca --datastore=datastore1 --network="VLAN 9" /Downloads/vendor/vmware/VMware-vCenter-Server-Appliance-5.1.0.5300-947940_OVF10.ova vi://esxi
Opening OVA source: /Downloads/vendor/vmware/VMware-vCenter-Server-Appliance-5.1.0.5300-947940_OVF10.ova
The manifest validates
Source is signed and the certificate validates
Please enter login information for target vi://esxi/
Username: root
Password: **************
Opening VI target: vi://root@esxi:443/
Deploying to VI: vi://root@esxi:443/
Transfer Completed
Warning:
 - Error loading X509 certificate: 'Failed to open crt file: /etc/ssl/certs/ca-bundle.crt'.
Completed successfully
</code>
  -  Next log into the hypervisor, we are going to set a static MAC for the appliance. Note that 00:50:56 is the VMware blessed prefix for static macs, but you can't use that whole range.  I flipped the first octet to 02 to make it a locally administered address.  I then generated the last 3 octets based on the IP address (gethostip on the assigned hostname, take the last 3 octects of the hex IP it gives you, and put those in). <code bash>~ # vi /vmfs/volumes/datastore1/vca/vca.vmx
~ # cat /vmfs/volumes/datastore1/vca/vca.vmx | grep ethernet0
ethernet0.present = "TRUE"
ethernet0.virtualDev = "vmxnet3"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.networkName = "VLAN 9"
ethernet0.addressType = "static"
ethernet0.address = "02:50:56:E8:09:14"
</code>
  - Make sure that the MAC address you just generated will be given an IP via DHCP.  The exact procedure for doing this is site-specific.
  - Power on the appliance!  (This is on the hypervisor) <code bash>~ # vim-cmd vmsvc/getallvms | grep vca
3      vca   [datastore1] vca/vca.vmx   sles11_64Guest   vmx-07    VMware vCenter Server Appliance
~ # vim-cmd vmsvc/power.getstate 3
Retrieved runtime info
Powered off
~ # vim-cmd vmsvc/power.on 3
Powering on VM:
~ # vim-cmd vmsvc/power.getstate 3
Retrieved runtime info
Powered on
</code>
  - Browse to https://vca:5480/ to [[vSphere 5.1 Virtual Center (vCenter) Appliance configuration|configure the VCA itself]].\\ Browse to https://vca:9443/vsphere-client/ to do your normal vSphere thing.\\ The default username/pass is root/vmware